Series: Large | Energy: 5,250 J
The Kent / FRD / Furukawa KF27 is a hydraulic breaker built for contractors, rental fleets, demolition crews, quarry operators, and equipment owners who need a breaker that fits their carrier correctly and delivers reliable output in the field. This model sits in the Large range and is well suited for commercial demolition, secondary breaking, road construction, oversize reduction, and heavy trench excavation. When a breaker is matched correctly to the carrier — by weight class, hydraulic flow, and operating pressure — operators get better production, less unnecessary vibration transmitted back to the machine, reduced wear on the attachment and bracket, and fewer problems with hoses, bushings, retainers, and seals.
The Kent / FRD / Furukawa KF27, with a service weight of 3,758 lb. The tool steel diameter is 5.51 in. The energy class is 5,250 J. These specifications define where this breaker fits in the lineup. A unit that is too small for the job will force the operator to work the tool harder than intended, causing overheating and premature wear. A unit that is too large for the carrier can create excess hydraulic heat, damage mounting hardware, and shorten the service life of both the hammer and the machine.
Maintenance discipline is as important as correct sizing. A hydraulic hammer operates in some of the most demanding conditions on a jobsite — dust, shock load, side load, heat, moisture, and thousands of impact cycles per hour. Even a well-built breaker will lose performance if the lower bushing wears undetected, the tool is run dry, the seals harden from heat cycling, nitrogen or accumulator pressure drifts out of specification, or hydraulic flow and pressure fall outside the recommended range. Owners should inspect the tool steel, retainers, bushings, tie rods, hoses, fittings, and the grease system on a regular schedule. A properly maintained hammer hits harder, runs cooler, and protects the carrier better than a neglected one. For many contractors, the real value of this model is not the purchase price alone — it is the ability to keep it running through repairable wear rather than replacing the whole breaker.
The design characteristics of the Kent / FRD / Furukawa KF27 include Kent / FRD / Furukawa impact energy ratings, proven steel geometry, multiple configuration options, and rugged field serviceability. These attributes make it well suited for applications where productivity, controllability, carrier protection, and access to service support all matter. When comparing this model against similar breakers, pay close attention to carrier size match, hydraulic circuit setup, tool steel availability, and the parts support network available in your area. Matching the hammer correctly to the carrier improves efficiency and helps prevent common issues such as weak hitting, slow cycling, tool overheating, premature bushing wear, and cracked mounting hardware.
HBS provides complete support for the Kent / FRD / Furukawa KF27, including hydraulic hammer repairs, full rebuilds, routine maintenance, and sales. Parts stocked and available for this model include chisels (5.51 in tool steel diameter), tie rods, upper and lower bushings, retainer pins, accumulator diaphragms or membranes, hydraulic seals and seal kits, front head components, and hoses and fittings. Whether this breaker is leaking oil, hitting weak, cycling slowly, overheating, wearing tools too fast, breaking retainers, or due for a full overhaul, HBS can diagnose the issue and return it to working condition. Contact HBS for service pricing, parts availability, rebuild options, and expert guidance on matching this hammer to the right carrier and application.
Key Features
- Energy class of 5,250 J places the Kent / FRD / Furukawa KF27 in the heavy-duty breaker category, designed for carriers running sustained commercial demolition, secondary breaking, and high-production applications
- Qtv/Qt quiet housing variant incorporates sound-attenuation panels for noise-sensitive applications, enabling operation near occupied structures and in municipalities with construction noise ordinances while sharing the same percussion mechanism and service parts as the standard configuration
- Furukawa Qtv system in the large class provides a progressive vibration isolation response at the carrier bracket, reducing peak shock transmission on 30 to 90 ton excavators running sustained quarry production or large demolition work where carrier frame fatigue is a real long-term concern
- Multiple configuration variants (Qtv) share the same internal percussion mechanism and service parts across the lineup, allowing configuration selection based on job-site noise and vibration requirements without affecting parts interchangeability or service interval specifications
Key Specifications & Service Points
- Core performance: energy class 5,250 J
- Parts available from HBS: chisels (5.51 in tool steel), tie rods, upper and lower bushings, retainer pins, accumulator components, hydraulic seal kits, front head parts, and hoses
