A breaker is an excellent attachment to your hydraulic hammer that helps to break up rock, concrete, asphalt, and other materials. But, in order to keep your breakers working properly and efficiently, you need to provide routine maintenance on the attachment. Not properly caring for your breaker will decrease your job productivity and performance. To make sure your breaker is properly conditioned, look to us at Hydraulic Breaker Services, LLC. Our business focuses on being unmatched when it comes to the hydraulic breaker and hammer industry.
Tip # 1 – Do A Double Take: Completely Inspect Your Breaker
In order to determine whether there are any worn or damaged pieces, you need to routinely inspect your hydraulic breaker after every use. These routine checks allow you to stay vigilant and get components repaired before further damage happens.
Tip # 2 – Make Sure You Use the Right Tools
You always check the angle of your hammer before you start to use it, so why not choose the right maintenance tools to take care of any daily wear and tear? There are maintenance tools available that measure the breaker’s lower bushing, retaining pins and the top angle. In order to make sure your breaker is performing well, be sure to measure these components on a daily basis.
Tip # 3 – Make Sure You Scan Your Hydraulic Hoses
You need to inspect your hydraulic hoses to make sure they are always properly routed and the correct length, because this reduces wear, tear and downtime. If the hoses are shorter than required it could restrict attachment extension, and if they are too long they can become dislodged and spread debris all over. So, make sure your hoses are working properly.
Tip # 4 – It’s Greased Lightning! – Make Sure You Grease Your Hydraulic Breaker
In order to keep your breaker lubricated and clear of debris, whether it is on a rock hammer or kent hammer, it is important to grease it on a daily basis. Greasing can be done manually or by an automatic greasing system. By making sure your breaker is thoroughly lubricated, you’ll have peace of mind knowing that your breaker will perform efficiently all day.
Tip # 5 – Not Every Tool Has the Same Function: Pick the Right Tool Point To Use
In order to boost productivity on the job and extend the lifespan of your hydraulic breaker, you want to match the right tool point with the correct function. Some options are a chisel tool point, blunt tool point, and pyramidal tool point.
Tip # 6 – Make Sure You Have the Proper Nitrogen Pressure
In order to determine the proper nitrogen pressure, there are two factors that need to work together: the application and the outside working temperature. There is a different pressure needed for breaking rock than there is for breaking concrete. Before you set the nitrogen pressure, be sure to survey your surroundings.
To make sure your breakers are working properly so that your job productivity and performance do not suffer, contact us at 800-940-8517 for a free quote. For more information on all our services and strong reputation, browse our website.